Troy-Bilt 24A-204B766 CSV 206 24-Inch 206cc Briggs & Stratton 850 Series Gas Powered 3-in-1 Self Propelled Chipper/Shredder/Vacuum Review
List Price : $800.00
Want more Discount? Get it here 
Just only $800.00 !
Discount Now
After much research, reading and re-reading the reviews, I decided to buy this car. I did it with one based on mutual agreement prior to the purchase of some of the negative reviews of customers in this forum. I also visited one of these machines in person at a local shop to get a first hand look at some of the questions that customers had complained in their reviews, too. My understanding before purchase consisted of the following topics:
* Accept the fact that after extraction, I wouldsome minor changes in the Assembly;
* During the installation, I replaced a few links and connections with better quality furniture that I bought from a local hardware store;
* During installation, I took many of the bolts and nuts, and added: "thread-lock" for most compounds.
These small details in assembly to avoid some of the problems I read reviews from customers. Then, after the completion of the installation of engine oil and a ¼ tank of fuel,and after start-up instructions, I started the car. He started to pull the first and run great. I have it with full throttle and let it run until it ran out of fuel tank ¼. While working, I turned the car and did a thorough check of the whole machine and how it works. In this investigation, I found some comments to improve performance. The following is a list of questions and what I've done on it.
* I found the lightvacuum seal between the nozzle housing crushing. Thus, a loss of vacuum for the leaves is (one of the complaints by some negative reviews). My solution: I removed the vacuum nozzle and installed a type of O-ring with silicone in the face of the nozzle. Results: It is sucked like a vacuum cleaner.
* I noticed that there are some blow-by at the junction of the finished product felt collection bag and the plastic from the slideSource Chopper (housing potential of dust and materials that blows in your face), during the operation. This was due to the wrinkles of felt heavy, from collecting around the plastic bag. My solution: I wrapped a heavy material around the surface of foam plastic slide and then the volume of the collection bag tied round the bath surface material that is tightened the seal and eliminates blow-by air, vacuum and materials.
These small changes in the assembly andresolved at the first intervention, some of the problems that some customers had complained in their reviews. The result is that for a few hours of additional assembly time, several of extra dollars, and a little common sense, my shredder, vacuum machine is a lot better.
Then I went out and went twigs and branches feed chipper for about two hours without any problem. Ate the limbs of a diameter as small as my grandson chew cookies.Yes, members of 1 - ½ inches in diameter, fed a bit 'slower, but the machine chewed them well. I saved some just for the smallest things Push down and ensure that all members were fully aligned.
Later, I was sucking leaves and acorns for about an hour. As I said, has sucked up like a vacuum cleaner. In total, I cut three bags full of brush and limbs, and suction and two bags of shredded leaves. The material was crushedlarge and were immediately used to fill with the mixture of soil in some valleys in my backyard.
After completing my first use, I left the car to go on fuel, which will keep the carb from gumming up. And I'm sure that all the arts and the leaves were completely torn and the light green for the chipper conduct. This ensures that failed, strength side when I started the next time.
In summary, this is a good car, if you follow someRespond to changes and common sense way of working, I have described. If a buyer is willing to bear some of these problems into account and use a little common sense to solve this problem, he or she does not hesitate to try on this machine. It worked for me.
Troy-Bilt 24A-204B766 CSV 206 24-Inch 206cc Briggs & Stratton 850 Series Gas Powered 3-in-1 Self Propelled Chipper/Shredder/Vacuum Overview
The Troy-Bilt 6.5-horsepower self-propelled chipper shredder vacuum features a powerful 6.5-horsepower engine for better performance and improved power. The unit has a 3-in-1 capability with a vacuum nozzle, chipper chute, and shredder to give you three clean-up tools for ultimate versatility. The 24-inch vacuum width is extra-wide for bigger clearance and makes quick work of large areas. The adjustable vacuum intake height will raise and lower the vacuum nozzle from 1/4-to-4-3/4-inches to accommodate varying ground conditions.
Other features include a 3-inch chipping capacity, and a heavy-duty hardened-steel impeller and cast-iron shredding screen that reduces debris in a 10:1 reduction ratio. The self-propelled transmission has 1-forward speed for easier use, and provides plenty of maneuverability for large yards. The 3-bushel, felt-lined collection bag reduces dust when in use, and the 6-inch lockable front caster wheels and 10-by-4-inch fully pneumatic rear wheels provide ease in maneuverability. The chipper comes with a limited 2-year warranty on materials and workmanship.
What's in the Box
Chipper/shredder/vacuum, and safety goggles.
Troy-Bilt 24A-204B766 CSV 206 24-Inch 206cc Briggs & Stratton 850 Series Gas Powered 3-in-1 Self Propelled Chipper/Shredder/Vacuum Feature
- The Troy-Bilt 6.5-horsepower self-propelled chipper shredder vacuum features a powerful 6.5-horsepower engine for better performance and improved power
- Chipper shredder vacuum comes with a 205cc Briggs & Straton OHV engine; features 2-Inch chipper capacity
- The cast-iron shredding screen reduces debris in a 10:1 reduction ratio
- Includes 3-in-1 capability with a vacuum nozzle, chipper chute, and shredder to give you three clean-up tools for ultimate versatility
- Backed by limited 2-year warranty on materials and workmanship
Customer Reviews
*** Product Information and Prices Stored: Mar 02, 2010 21:50:04
See Also : delicious power tool fein multimaster top rockwell rk5107k sonicrafter
