Yard Machines 24A-452G700 205cc Briggs & Stratton 800 Series Gas Powered Chipper Shredder Review
List Price : $529.99
Want more Discount? Get it here 
Just only $529.99 !
Related Products
Yard Machines 24A-452G700 205cc Briggs & Stratton 800 Series Gas Powered Chipper Shredder Overview
Yard Machines, Stationary Chipper/Shredder, 205CC Briggs & Stratton 825 Series OHV Engine, 8.25 Ft.-Lbs. Gross Torque Rating, 2" Chipper Capacity, 10:1 Debris Reduction Ratio, 2.5 Bushel Bag Capacity, Poly Drop-Down & Rake-In Hopper, 3-Way Feed, Steel Chipper Blade, 10" Wheels, 2 Year Limited Warranty.
Yard Machines 24A-452G700 205cc Briggs & Stratton 800 Series Gas Powered Chipper Shredder Feature
- A powerful 5.5 HP chipper/shredder ideal for home or professional use
- 3-way poly drop-down and rake-in hopper
- 2.5-bushel bag capacity
- 10:1 reduction ratio
- Non-CARB Compliant/Not For Sale In California
Yard Machines 24A-452G700 205cc Briggs & Stratton 800 Series Gas Powered Chipper Shredder Specifications
The Yard Machines 5.5-horsepower chipper shredder comes equipped with a 5.5-horsepower Briggs and Stratton engine, and features a 2-inch chipper capacity with a 10:1 reduction ratio. The unit also comes with a 3-way poly drop-down and rake-in hopper with a steel blade for added strength and durability. The chipper comes with a 2.5-bushel bag capacity for added convenience and is backed by a 2-year warranty.
Available at Amazon Buy it now!
Customer Reviews
A flimsy piece of junk! - G. Williams - Lewisville, NC
This car is a total waste of money if you only want to shreds leaves. There is not much bigger. I had many problems and that carburetors are working very hard to find. I recommend that you found elsewhere
I will not buy another one - Thomas L. Mcclelan - tacoma
I have a 1998 version, in possession of this shredder for 8 years, and finally given away. I am planning a Bearcat 8HP or similar (more robust) to upgrade the shredding.
I 1 / 2 acres of Douglas fir, the branches in a storm drops, for example, 14 tend to take in the month of December. I also removed the ivy and blackberries, so I knew that I would be a waste yard blue 2x a month earlier. I bought my shredder local Home Depot, especially since I do not know what else is outthere, and it seemed a good product () at the moment.
I have found over the years that there is really only a very light car, and that in reality the profile that you wear pretty fast. I only have my 2-4 times a year, if I built a lot, but everything that could not wear.
The axis of cycling through the base plate, the plate is straightened without bushings for the axle. Following prolonged oscillations of the axisHoles so that it fell right off the plate.
The conduct of small feeding branches up to 2 "in diameter. It works well until the branch goes down. As soon as the area" about 18 long, which leaves only grab the stick and bite, and it kind of bounces itstead slide. Finally, in the micro-morsels eaten, but you're probably better, the rest of the stack and puts it into firewood.
The conduct of large for feedsLeaves and twigs is a blow-molded piece of plastic. Both have made slides as more than just a man of full competition to prevent them sticking their fingers in their idiots blade. But who are part of the tensions brought on the big slide in stress cracks in all four corners. I had replaced a ramp for the cracks, while still under warranty, and the new slide is quickly developed the same type of cracks.
The exhaust pipe is stamped and spot-welded sheet metal,and has developed stress fractures vibration, welding, and finally consented. There are manual controls for the screws that secure the exhaust pipe into place, and I was aware. The display is large slice rechopping stops for a series of four beats, with scourges like 3 fingers, that everything was too big to get access to fly. Unfortunately, the metal was used on the screen, so soft and malleable, it has quickly grown fromconvex to concave, so that the debris piled up just outside the reach of the flagellum. This means that I had to close, open (the side that deportation does not rest on a separate open, but falls on the hands), then you will find a large bolt or pin with a hammer the two pins on the screen hold. Once I pulled away the debris and the library that has the screen, I would rotate 180 degrees so that the new convex face opposite the flagella are, and together again. I went on 3 screens at 8Years, because the metal would be bent back and forth, very often (think of a bar bent wire), and finally snaps. You need a beefier computer screen to be taken against the strength of wood chips.
Crushing blades are not easily sharpened, and my attempt, which led to an imbalance terrible machine. They should also remove all access to expressways blade shredders, where the nuts have 6 straps that do not line up muchtogether with the body, when I tried again. Stress cracks developed in the plastic housing at the point where it joins the arc metal grinding wheel.
Vibrations caused also break the gas tank mounting slot so that the plastic tank was barely room to the time I took away from me. The engine was still good, even if I do it to the carburetor after the old is to replace clogged with gunk, and some of the reconstruction kit does not work. AnotherOscillatory behavior is interesting that the press loves to go ", so I would dig a hole in the ground have made their own so they do not move away from where I use it.
The unit came with a mesh bag to catch the chips, but was so small that I never did. The chips fly, come so fast it will travel 30-40 feet, if you need some kind of stop.
By and large, this shredder will do what the advertising says it does, butsimply does not do much without a lot of attention, TLC, and swearing. Fortunately, it does so much noise that the oath is not part of another, when it occurs during execution. If you want to delete only some leaves of maple, once or twice a year, this may be ok, provided you have some mechanical aptitude. But for me, I'm glad that the apparatus inconsistent put behind them as a regrettable chapter in my life.
*** Product Information and Prices Stored: Feb 13, 2010 18:19:37
Thanks To : fein multimaster top freud saw blade
ไม่มีความคิดเห็น:
แสดงความคิดเห็น